Aluminum grille ceilingWhat are the processes for installation? 

       Aluminum grille ceilingIt has been very popular in recent years. Many public places, hotels and other areas have adopted this kind of ceiling. What are the technological processes for the installation of aluminum grille ceiling? Let\'s learn about it today.

Install water, electricity and ventilation pipes, apply black paint above the ceiling height line, and install water, electricity and ventilation pipes with black paint; initially install the metal grid of the suspension board ceiling; the initial installation position of the ceiling arch and the height of the fire sprinkler Adjust the height of the fire sprinkler according to the height adjustment of the ceiling arch head, adjust the direct head of the metal mesh, directly install lights and lamps, adjust the straightness and straightness of the grid according to the fine adjustment, adjust the metal grid with the metal mesh, put the fire sprinkler and the installation lamp directly, adjust according to the arch height, and adjust the fire sprinkler and the fire lamp and the head in a straight line.

       1.施工放行：根据Aluminum grille ceilingThe floor plan, the vertical and horizontal layout lines of the pop-up component materials, the contour lines of the complex parts, the height lines of the ceiling, and the hanging points of the ceiling are determined and marked at the same time.

       2.Fastening treatment of suspended ceiling: according to the design requirements, use metal expansion bolts or shot peening nails to fix the suspended ceiling connection, or directly fix steel bars, galvanized iron wires and flat iron suspenders.

3.The combination and assembly of grid monomers: the assembly of local grid, the combination of monomer and monomer, the combination of unit and unit, as the rhythmic pattern composition factor of grid ceiling, should be assembled on the ground as much as possible when necessary, and then hang according to the method required by the design to ensure the close connection between the components, according InstallationThe relevant technical requirements of the operation, the use of DingTalk, adhesives, tenon joints.and accessoriesReinforcement.

       4.Grille hoisting: flat solid,铝 格栅就位后，下凸部分用吊杆拉紧，上凹部分松开，吊杆向下移动，格栅部分加强。对于布置紧凑、双向跨度大的Aluminum grille ceilingThe central part of the entire ceiling surface should also be slightly arched.

看到这里，想必你对Aluminum grille ceilingThe material has a further understanding. Want to know more, welcome to continue to pay attention to this station!

责任编辑：凯麦Aluminum grille ceiling Manufacturer-Huang Liping1.074..1.1.

This article label: aluminum grille ceiling,Triangular aluminum grille,Aluminum grille manufacturers , Aluminum grille ceiling

All rights reserved(Kaimai metal ceiling aluminum curtain wall) reproduced please indicate the source