carved aluminum ceilingThe installation is based on the steps. Compared with other aluminum ceilings, it has more ornamental art and is highly decorative. Generally, aluminum buckle ceilings are mainly equipped with special keels (keels are galvanized steel plates and painted steel plates), with a standard length of 3000mm. The following Kaimai Xiaobian introduces the installation steps of carved aluminum ceiling:

1. Install the closing corner series according to the same level.

2, according to the appropriate spacing lifting light steel keel (38 or 50 keel), the general spacing of 1-1.2 meters, boom distance according to the distribution of light steel keel to determine.

3. The hanging parts pre-installed on the buckle plate keel and the buckle plate keel are tightly attached to the light steel keel and buckled under the light steel keel in a vertical direction with the light steel keel. The spacing between the buckle plate keel is generally 1 meter. After all the installation, the level must be adjusted (in general, when the vertical distance between the building and the aluminum buckle plate to be hoisted is not more than 600MM, 38 keel or 50 keel is not required, instead of using keel hanger and boom direct connection).

4. Buckle the aluminum strip gussets parallel to the matching keel in sequence, and connect the strip gussets with special keel series connectors.

5. Wear gloves when installing the aluminum gusset plate surface. If you accidentally leave finger marks or stains, you can clean it with warm boiled water and detergent and wipe it dry. A good installation process will be more convenient to disassemble.

Guangzhou Kaimai Metal Building Materials Co., LtdCommitted to becoming a high-end metal building materials design, production, sales and installation services. Focus on sales of metal ceiling, aluminum square, aluminum grille, aluminum composite panel, aluminum curtain wall; can be customized all kinds of aluminum grille, aluminum hanging piece, aluminum curtain wall plate, aluminum gusset plate, aluminum square pass, aluminum hanging bar, aluminum square plate and other building decoration materials; is a modern enterprise integrating sales, design and technical service installation. Committed to providing customers with engineering one-stop overall solution!