在运输木纹氟碳aluminum veneer curtain wallShould pay attention to what?

      木纹氟碳aluminum veneer curtain wallAfter finishing the ceiling, there will be a surprising effect. It can be seen that if we want to use the wood-like fluorocarbon aluminum veneer curtain wall as the ceiling, this requires us to avoid harming them when transporting the power grid. When the customer signed for the fluorocarbon aluminum veneer, it was found that the fluorocarbon aluminum veneer was deformed and damaged, which was always a problem for all fluorocarbon aluminum veneer manufacturers. Among them, logistics was also a problem. The following is the introduction of a few points need to pay attention to the wood grain fluorocarbon aluminum veneer curtain wall transportation. Now follow Kaimai Xiaobian to learnaluminum veneer curtain wallPay attention to transportation!

       先来看下aluminum veneer curtain wallFrom the manufacturer to the customer\'s hands need to go through several processes:

1. From the manufacturer\'s packaged wood-grain fluorocarbon aluminum veneer curtain wall, workers transfer it to the truck and put it away, and tow it to the logistics department for unloading.

2, from the logistics department to transport goods on board, to the logistics transfer station, unloading.

3. The goods are transported by train from the logistics transfer station and unloaded to the customer\'s local logistics department.

4. Contact the customer, deliver the car to the door, load the car, and the customer will pull away from the customer.

       因为Fluorocarbon aluminum veneer是一种非加压货物。把整辆车都送过去是件好事。几乎没有损坏和变形的问题。整辆车的价格可能很贵，另一个原因是货物太小而不能派车。因此，Fluorocarbon aluminum veneerManufacturers can be said to have been thinking about how to package transportation. Generally speaking, manufacturers pack cartons into wooden frames after cartons, because wooden frames need to be priced. Therefore, merchants usually ask the customer\'s opinion, regardless of whether the product is used as a wooden frame. If the wooden frame is well laid,Fluorocarbon aluminum veneerThe probability of deformation and damage will be greatly reduced.

       其次再来看看导致木纹氟碳aluminum veneer curtain wallThe five main factors of deformation and damage in logistics are:

1, in the process of handling should be light, in order to avoid the aluminum plate directly with the ground or wall together to destroy the aluminum plate, not only a waste of materials, but also delay time, may not be able to deliver on time and affect credit.

       2、其次，Fluorocarbon aluminum veneerThe wooden frame packaging of aluminum plates is also mainly a simple wooden frame packaging, which cannot withstand protection to a large extent. The logistics department can place the aluminum single molecule under gravity compression, causing deformation.

3. During transportation, the board should be covered with cloth to prevent rainwater from eroding. If it is eroded by rain, it will cause disharmony between product appearance and product quality. Therefore, strict rain protection measures are a top priority.

4. When storing, it should be placed in a dry, bright and ventilated place to prevent the environment caused by damp aluminum plates from being corroded or touched, which will affect the appearance. And to prevent storage with chemical materials.

5, logistics workers loading and unloading, misplacement is also caused by fluorocarbon aluminum veneer deformation and damage factors.

6. When transporting aluminum veneer, it should be handled gently. After the impact, the corners of the aluminum plate and its layout will be damaged, thus affecting the construction.

责任编辑：凯麦aluminum veneer curtain wallManufacturer-Huang Liping 13074271912

本文标签：aluminum veneer curtain wall,Fluorocarbon aluminum veneer, curtain wall aluminum veneer, wood grain aluminum veneer, aluminum veneer manufacturers

Copyright (Kaimai metal ceiling aluminum curtain wall) reproduced please indicate the source