长条suspended ceilingAluminum strip gusset ceilingHow to disassemble

长条suspended ceilingAluminum strip gusset ceilingHow to disassemble this is divided into two situations: one is non-maintenance, the whole is no longer used, and the other is maintenance or replacement of materials.

长条suspended ceilingAluminum strip gusset ceilingThe first method of disassembly is forced disassembly. This is simple and can be directly removed with a screwdriver. During forced disassembly, gloves should be worn. Disassemble and pay attention to packing. All materials can be recycled and reused in the recycling station. All materials have no secondary pollution.

How to disassemble the aluminum strip gusset plate of the long ceiling is the key point we are going to talk about today, which needs to be overhauled or partially replaced:1First, buy two suction cups in the hardware store.2, use a suction cup to firmly stick to a corner of the aluminum strip gusset plate of the long ceiling, Then gently pull one side of the aluminum strip gusset plate, and gently pull it several times to raise the edge of the aluminum strip gusset plate. On the other side, use the same method and finally suck the suction cup in the middle position.3Another suction cup uses the same operation method to make the other end of the bar buckle aluminum ceiling also tilted.4 , both hands at the same time, the whole aluminum gusset plate removed. 5If there is glass glue on the edge of the aluminum strip gusset plate of the long suspended ceiling, it can be cut with a utility knife.,When it is installed, it can be sealed with glue.

以上就是长条suspended ceilingAluminum strip gusset ceilingDisassembly method.

责任编辑：凯麦Aluminum strip gusset ceilingsuspended ceilingManufacturer-Huang Liping 13074271912

本文标签：Aluminum strip gusset,Buckle ceiling,Aluminum strip gusset ceiling龙骨,Aluminum strip gusset ceiling

All rights reserved(凯麦金属suspended ceiling铝幕墙）转载请注明出处