WeChat QR code
There is a discount for adding WeChat
Hello! welcome to guangzhou kaimai metal building materials limited company's official website!

Quality wins the world, quality casts the futureMetal ceiling aluminum supply service provider

National hotline:

0130-7427-1912
86-13074271912

Focus on Kaimai, learn more industry knowledge
Aluminum mineral wool board composite board ceiling installation method
Author: Camer metal ceiling aluminum curtain wall EDIT: kaimai Source: Kaime metal building materials Release date: 2020.02.03
Information Abstract:
The installation method of aluminum mineral wool composite board ceiling is the same as that of other engineering aluminum gusset board ceiling materials. The specific installation method of aluminum mineral wool composite board is as follows:

Aluminum mineral wool board composite boardCeiling installation method

Aluminum mineral wool board composite board ceiling installation method和其它的工程Aluminum gusset ceiling材料是一样的,Aluminum mineral wool board composite boardThe specific methods of installation are as follows5 Steps:


Installation Drawing of Aluminum Mineral Wool Composite Plate

13. Install the aluminum trim corners according to the same level.

2, according to the appropriate spacing hoist and light steel keel, boom spacing is less than or equal1.2m, light steel keel spacing is1.2M.

31. Connect the hanger pre-installed on the triangular keel together with the triangular keel and the light steel keel in a vertical direction according to the plate spacing, and then adjust the level. (Note: Kaimai aluminum mineral wool board keel accessories are customized,Can bear the weight of aluminum mineral wool composite board)

4、将Aluminum mineral wool board composite boardThe two sides of the plate are pressed into the triangular keel seam in parallel. After the two sides in the transverse direction are installed first, the right angles are found at the two ends in the transverse direction, and then the straight lines are drawn and pressed step by step in rows. After each row of buttons, the plate surface shall be adjusted once to ensure that the plate surface is flat and the plate seam is vertical. (Note that the direction with small pits on the side of the square plate is inserted into the triangular keel seam)

5Gloves should be worn when buckling aluminum mineral wool composite board. If dirty marks are left on the board surface carelessly, clean them with clear water. If there is a protective color film, the protective film is forbidden to be torn off during installation.


Aluminum mineral wool composite board Kaimai aluminum mineral wool composite board 4

以上就是Aluminum mineral wool board composite board的安装方法



责任编辑:凯麦Aluminum mineral wool board composite boardManufacturer- Huang Liping13074271912

本文标签:aluminum mineral wool board,Aluminum mineral wool sound-absorbing board,Aluminum mineral wool sound absorbing board,aluminum mineral wool composite board

All rights reservedKaimai Metal Building Materials (Kaimai Metal Ceiling Aluminum Curtain Wall) Reprinted Please Indicate Source

National Service Hotline

0130-7427-1912 86-13074271912