aluminum veneer curtain wallThe manufacturer lists the construction method elements.

       aluminum veneer curtain wallThe emergence of can be said to give contemporary architecture a new vitality, itThe beautiful, atmospheric and personalized style shown gives designers new choices, and is therefore widely sought after and loved. Although the application of aluminum veneer curtain wall has been widely praised, good products are also inseparable from good design. The two complement each other and cannot be separated, so good aluminum veneer curtain wallWhat principles should be followed in the design?The following is a summary of several key points of Kaimai building materials, hoping to help you.

1. aluminum veneer construction method

Before the construction of aluminum veneer, the construction personnel must first have a detailed understanding of the construction method, so that during the construction, what machines and tools are needed can be very clear. Aluminum veneer construction machines and tools can be divided into the following three aspects:

1. Workbench, cutting machine, forming machine, bending machine and grinder required for cutting, processing and assembling metal plates, etc.

2. Portable electric drill connecting metal plate, concrete wall drilling electric drill, steel plate ruler (1m long), long tape measure, box ruler, hammer,

3. Steel chisels of various shapes round (flat), lead wire, powder wire bags for elastic wire, ink fountain, small white wire, portable grinding wheel, pliers, iron level ruler, cotton wire, broom, shovel, operation, ash trough, ash bucket, tool bag, gloves, red pencil, etc.

2.aluminum veneer curtain wallConstruction scheme

The construction plan of aluminum veneer on the wall clearly includes the operation conditions, but many construction personnel are still not very clear, thus causing engineering quality problems. In fact, the construction operation conditions can be divided into five aspects:

1, the top plastering has been completed, and after drying, the moisture content is not higher than 8%; Wood products shall not be more than 12%.

2, water and electricity and equipment, the top wall reserved embedded parts have been completed. The machines and tools for vertical transportation are prepared in advance.

3, to check the installation of decorative panel engineering at the grass-roots level in advance, and make hidden pre-inspection records, qualified rear can be installed process.

4, the outer shelf (high-rise multi-purpose hanging basket or hanging frame) should be built and installed in advance, multi-storey houses should choose double-row shelves or bridge, its vertical rods and tie rods should leave the wall and doors and windows corner 150~200mm. The step height and support of the shelf shall conform to the construction requirements and safe operation procedures.

5, the construction personnel for technical disclosure, should emphasize the technical measures, quality requirements and finished product protection. Before large-scale construction, the model room shall be made first, and the team construction can only be organized after being qualified by the quality inspection department.

The above is the detailed introduction of the small editor on the construction of aluminum veneer. I hope you can bring help. If you have any questions, you can consult at any time. The small editor will answer for you at any time. If you are interested in the abovealuminum veneer curtain wall Suspended ceiling is interested or has any questions, please click to contact our online customer service, or call: 13074271912, Kaime Building Materials-do a good job of ceiling!

Responsible editor: Kaimai aluminum veneer curtain wall manufacturer-Huang Liping 13074271912

This article labels: aluminum veneer curtain wall, fluorocarbon aluminum veneer, curtain wall aluminum veneer, wood grain aluminum veneer, aluminum veneer manufacturer

Copyright (Kaimai metal ceiling aluminum curtain wall) reproduced please indicate the source