凯麦告诉你Aluminum veneerThe correct installation method

       随着时代的发展，大家对装饰装修也有了越高的品质追求，这也促进了Aluminum veneer manufacturers的进步。到如今Aluminum veneerIt has become one of the commonly used decorative materials for modern building curtain walls. It has light weight, good rigidity, good strength, stable function, long service life and can be reused. As environmental protection efforts continue to strengthen,Aluminum veneerThe more widely used in the architectural decoration industry. The following is a detailed understanding by Kemer\'s editor.Aluminum veneerThe correct installation method.

Aluminum veneer installation site:

       1、防线：Aluminum veneerIn the first step of curtain wall construction, the skeleton must be fixed and the position of the skeleton should be bounced to the base level. The skeleton is fixed on the subject structure, and the quality of the main body is checked before the defense line.

2. The connecting piece of the fixed frame: the connecting piece is welded on the column of the main body mechanism to fix the frame.

3. Fixed skeleton: skeleton anti-corrosion treatment. The installation framework shall be in accurate position and firmly combined. Check centerline, surface markings, etc. after installation. In order to ensure the installation of aluminum veneer, theodolite should be used to penetrate the beam frame bar. In the construction of aluminum veneer curtain wall, special attention should be paid to the deformation joints, settlement joints and variable cross-section to make them meet the requirements of use.

       4、Aluminum veneerAfter the curtain wall construction step is to install the aluminum plate: the installation of the aluminum plate should be firm and reliable, simple and easy. The gap between the board and the board should be internally treated to make it flat and smooth. After the construction of the aluminum veneer curtain wall is completed, the parts that are easy to be contaminated are covered with plastic film or other materials for protection.

Installation method:

1. Install and close the corners according to the same level.

       2、按不同的要求有不同的骨架，如：L50*50*5mm角钢固定，预埋件铝挂件固定等，根据不同的产品有不同的固定方法。

3. The hanging parts pre-installed on the keel of the gusset plate, together with the keel of the gusset plate, are tightly attached to the light steel keel in a vertical direction under the light steel keel. The spacing between the keel of the gusset plate is determined according to the size of the plate type, and must be adjusted to horizontal after all installation.

4. Buckle the gusset plate on the keel in sequence. After each piece is buckled, press down the inverted locking plate and connect the keel with the connecting piece when connecting.

5. Gloves must be worn when installing the board surface. If fingerprints or stains are accidentally left, detergent can be used to clean and wipe dry.

       好啦，以上就是Aluminum veneerI believe you will have a clearer idea about the installation in the future after reading it! want to learn more about aluminum veneer information, sustainable attention to our kaimai oh!

责任编辑：凯麦Aluminum veneerCurtain Wall Factory-Huang Liping 13074271912

This article labels: aluminum veneer curtain wall, fluorocarbon aluminum veneer, curtain wall aluminum veneer, wood grain aluminum veneer, aluminum veneer manufacturer

Copyright (Kaimai metal ceiling aluminum curtain wall) reproduced please indicate the source